Bunnasia Laos Store now open - Opening Soon in Thailand, Cambodia, Singapore and Malaysia
Zelbrite 15kg
Zelbrite 15kg
Zelbrite 15kg
₭250,000

Zelbrite 15kg

Using

  • New filters

  • Use the spreader if one was supplied with your new filter.
  • Half fill the filter with water
  • Avoid breathing the dust.
  • Do not allow any media to enter the center pipe - cover it with a plastic cup.
  • Ensure an even spread all around.
  • Thoroughly clean the O-ring grooves before assembling the MPV or attaching the side mount unit.
  • Do NOT lubricate the O-ring with Vaseline™ or any petroleum jelly, use only silicone grease.
  • backwash and rinse several times until  the clean-vue optic shows clean water, before setting  on  'Filtration'

Existing filters

  • If you are refilling an existing filter, be sure to replace the O-rings for the top-mount MPV or the port flanges on side-mount filters. Order them from us before you start.
  • Do NOT lubricate the O-ring with  Vaseline™ or any petroleum jelly.
  • Remove the MPV (top-mount) or the plumbing (side-mount)
  • Allow the filter unit to drain overnight - wet sand is very heavy
  • Completely remove the old media (turn the filter upside down).
  • Half fill the filter with  water
  • Do not allow any media to enter the center pipe - cover it with a plastic cup.
  • Ensure an even spread all around.
  • Remove any excess sand and carefully clean the O-ring grooves.
  • backwash and rinse several times until  the clean-vue optic shows clean water, before setting  on  'Filtration'

 

+